• SET-50 SET-50 SET-50 SET-50

    详细信息

    ?品牌:TES华盛仪器 ?型号:SET-50 ?加工定制:是 ?
    ?测量范围:0.68KG ?测量精度:0.01 °?外形尺寸:20*25*80 mm?
    ?用途:五金 ?长度:80 mm?工作温度:25 ℃?
    ?重量:1 ㎏?装箱数:1 ??

    ?


    ?

    ?


    ?

    ?

    利边测试器

    利边测试器是产品安全设备测试的领导者,当前在全世界制造业中广泛使用,包括玩具、企业设备、汽车制造商及家电等。因为越来越多人关注家居产品的安全使用,所以 Underwriter’s Laboratory (UL)制订出标准的测试仪器,去测试各种不同消费产品。

    美国TES华盛仪器公司是唯一利边测试器SET-50的原生产商。

    如您关注您的产品利边安全,并使之符合(UL公司及消费品安全委员会制订的)国际标准,您必需购买利边测试器SET-50及胶帽TC-3。

    利边测试器是非常容易使用及耐用。贝壳形设计,特别适合放於手中,轻巧测试臂及完全密封式的轴承,可减少磨擦,加入新弹弓来符合*新的UL公司力度要求,所有可移动的部份均有保护来防止污垢及损坏。

    利边测试器需配合胶帽一起使用,而胶帽是模彷人类手指厚度而设计。

    ?

    规格

    专为UL标准而设计的测试器。

    UL公司制定标准来决定电气产品的锋利边程度(UL1439),这标准名为利边测试器。提供一个客观的标准,来决定符合现有的安全要求。
    大部份UL标准包括在消费产品上的主要要求例如边缘、突出部份、角位、包围物品、开口、围边、手把等等,这些部份都需要圆滑以不导致伤害。

    ?

    ·?

    设计

    方便易用和长寿

    锋利的边缘测试器型号SET-50 由适合手型设计的贝壳状机壳组成 (用Cycoloy 塑料制做, IBM 电脑机壳也选用同样材料制造)。特点包括一条细小的手臂、被密封的滚珠轴承减少摩擦,并且加入新弹弓来符合*新的UL公司力度要求,所有可移动的部份均有保护来防止污垢及损坏。

    利边测试器型号SET-50 配合胶帽TC-3使用。这成套工具包括42个胶帽,胶帽上附有三卷备用装配的磁带,方便在测试的工具上滑行。

    这个磁带盖帽符合U.L.三卷磁带的要求:
    一层3M 泡沬材料为1/16”厚
    一层3M 泡沬材料为1/32”厚
    表面一层为聚四氟乙烯磁带

    磁带胶帽*有效率的用途是容易和迅速地对多个制造业进行测试,并且不用在测试前在工具上安装三层不同的磁带。每次测试须用磁带胶帽,在几秒钟内它即可被除去、被辨认和被替换,因而可在很短时间内进行更多的测试。
    磁带胶帽附的中心有1/16”的显示,帮助审查员确认测试中心点。

    ?

    操作

    产品安全测试从未是这容易

    1.?磁带盖帽一直在利边测试器的压力头以黑色为中心线和红色塑料盖帽面的部份滑行。

    2.?测试时,磁带摆放在被检查物件的边缘上。用手拿着机壳,按下磁带头盖, 直到测试臂及机壳形成直线。

    3.?沿边缘2英寸移动压力头再返回起点。然後由边缘撤出工具。边缘与帽盖头之间的距离为4英寸。

    4.?检查磁带盖帽确定是否穿透两层感应器。如果穿透,黑色的磁带将会被削减。利边测试器可接受的锋利程度是不可穿透感应器的外面两层。

    ?

    关於TES公司

    ?

    成立於1990年,是利边测试器及胶帽套的原生产商

    一部份着名生产商已经使用华盛公司的利边测试器

    Amana Appliances
    Canon Corporation
    Coleman Products
    Eaton Corporation
    Electrolux
    Fujitsu
    General Electric
    Hamilton Beach/Procter Silex
    Hewlett-Packard
    Hot Point
    IBM
    La-Z-Boy
    Litton Corporation
    Mattel Maytag
    NEC America
    Nikon
    RCA
    Rheem
    Seksun Corporation
    Siemens Corporation
    Snapper
    Sunbeam
    Underwriters Laboratories
    Westbend Corporation
    Westinghouse
    Whirlpool
    Xerox

    ?

    ?

    English Version

    ?

    ?

    The Sharp Edge Tester?is the leader in product safety equipment, currently in use worldwide by manufacturers of toys, home appliances, business equipment, automobile manufacturers, home appliances, every item used in the kitchen, and much more.

    With so much concern over the safety of products to be used in the home, Underwriter’s Laboratories has issued standards to test edge sharpness on a variety of consumer products.

    Technical Engineering Service (TES) is the original and only manufacturer of the Sharp Edge Tester Model SET-50.

    If you are concerned about the safety and sharpness of your product and want to meet international standards as set by UL and the Consumer Product Safety Commission, then you need to order the Sharp Edge Tester and Tape Cap Kit for use on your production line.

    The Sharp Edge Tester Model SET-50 is extremely easy to use and durable. It consists of a clam-shell type housing which fits into the palm of a hand. Features include a compact arm, sealed ball bearings to reduce friction, and a new spring to meet the latest Underwriter’s Laboratories force requirements. All moving mechanisms are protected against dirt and breakage. The Sharp Edge Tester is used with the available Tape Cap Kit which simulates the thickness of skin on the human finger.


    Specifications:

    This product was designed specifically for Underwiter’s Laboratories

    Underwriters Laboratories has released a “Standard for Determination of Sharpness of Edges of Electrical Equipment,” U.L. 1439. This standard calls for the use of the Sharp Edge Tester in order to provide an objective and uniform test method for determining compliance with an existing safety requirement.

    Most U.L. standards covering consumer products contain a subjective requirement such as “an edge, projection, or corner of an enclosure, opening, frame, guard, knob, handle, or the like, shall be smooth, well rounded, and not sufficiently sharp to constitute a hazard.”
    Based on recent publications, it is evident that the sharpness of edges on consumer products is important to many government agencies like the Consumer Product Safety Commission and the National Bureau of Standards. Comment from the industry — where thousands of Sharp Edge Testers are in use — favor the general design concepts of this U.L. chosen Sharp Edge Tester over all others.

    This model appeared in Production Magazine and in a technical paper of the “UL Sharp Edge Tester” #MR-77-469, published by the Society of Manufacturing Engineers.

    Note: If you have a new product to submit to ‘UL’ for approval. You must use this tool to test it’s EDGES. They will not approve your product without doing so.


    Design:

    Designed for Ease of Use and Longevity

    The Sharp Edge Tester Model SET-50 consists of a clam-shell type housing (made of Cycoloy plastic, the same material used to manufacture the housing of IBM computers) which fits into the palm of the hand. Features include a compact arm, sealed ball bearings to reduce friction, and a new spring to meet the latest Underwriter’s Laboratories force requirements. All moving mechanisms are protected against dirt and breakage.

    The Sharp Edge Tester Model SET-50 is used with the Tape Kit Model TC-3. This kit consists of 42 pieces each with three pre-assembled tapes on a plastic cap, which slips on to the tool for testing.
    This Tape Cap meets the U.L. requirements of three tapes:
    1 layer of 3M Scotch Foam, 1/16” thick,

    1 layer of 3M Scotch Foam, 1/32” thick,

    1 laver of skived Teflon Tape

    Use of the Tape Cap is the most efficient way for the inspector to easily and rapidly conduct multiple tests on the manufacturing line without having to install three different layers of tape on the tool prior to testing. Each time a test is performed with the Tape Cap, it can be removed, identified, and replaced within seconds; thus providing more tests in less time to facilitate inspection reports.

    The Tape Cap also features a 1/16” wide guide line which is on the center of the cap and helps the inspector performing the test to “center” the tape and the tool on the edge being tested.


    How to use:

    Product Safety Testing Has Never Been This Easy

    1. Slide the Tape Cap all the way on to the pressure head of the Sharp Edge Tester with the black center guide line and the uncovered portion of the red plastic cap facing up.

    2. Position the tape covered pressure head on the edge of the item to be checked for sharpness. Holding the clam shell base in your hand, press down on the tape covered head until the arm and the tool form a straight line.

    3. Move the pressure head two inches along the edge and then back again to the starting point. Then withdraw the tool from the edge. The total distance of engagement between the edge and the tape-covered head is therefore 4 inches.

    4. Examine the tape cap to determine whether or not penetration has occurred through the two-sensing layers. If penetration has occurred, the black indicating tape will be visible through the resulting cut. The application of the Sharp Edge Tester to an edge with acceptable sharpness will not result in the cutting through the two outer layers of the sensing tape.


    About TES:

    Technical Engineering Service is the original manufacturer of the Sharp Edge Tester and Tape Cap Kit. We have been manufacturing this product since 1973.

    Some of Companies which have used the Sharp Edge Tester:

    Amana Appliances
    Canon Corporation
    Coleman Products
    Eaton Corporation
    Electrolux
    Fujitsu
    General Electric
    Hamilton Beach/Procter Silex
    Hewlett-Packard
    Hot Point
    IBM
    La-Z-Boy
    Litton Corporation
    Mattel Maytag
    NEC America
    Nikon
    RCA
    Rheem
    Seksun Corporation
    Siemens Corporation
    Snapper
    Sunbeam
    Underwriters Laboratories
    Westbend Corporation
    Westinghouse
    Whirlpool
    Xerox


    Ordering Information


    ?

    SET-50 sharp edge tester plus TC-3 Tap Cap (includes 44 piece)

    HK$4,650 per set

    Buy It Now


    TC-3 Tape Cap (includes 44 piece)

    HK$1,800 per box

    Buy It Now

    Made in the USA

    ?

    ?

    ?

    ???买家在收到货时,请与货运公司人员当面验货再签收!请仔细检查配件是否齐全,外观有无损坏,特别是外观有无破损,如有损坏或是配件丢失,请您拒收,并立即联系东莞华盛公司协商处理!若您不验货检查就签收(例如签收后才发现外观损坏或配件丢失.恕本公司概不负责)造成的损失由买家自行承担(买家签收后本公司将视为产品完好到货)因本公司一直坚持薄利多销原则.还请大家多多配合.谢谢大家的理解和支持!

    ?

    ??

    ???华盛仪器yabo88提现是集研发、生产销售于一体的实验仪器专业制造商。我公司专业致力于研发、生产高品质的现代化实验设备,已通过了ISO9001/2000国际质量体系认证,公司拥有先进的生产及检测设备,并具有完善的计量及质量保证体系。
    ????公司主要产品有:玩具检测仪器类系列、环境试验箱类系列、电子测量仪器类系列、空气压缩机类系列、冷冻式干燥机类系列等基础实验室设备,并广泛应用于生物制药、卫生防疫、环境保护、农业科研等领域。我们本着以客户服务为导向,为客户提供实验室仪器及电子行业生产设备的整体解决方案和专业化服务。我们的经营理念是“客户,以质量为本”,为目标市场提供一流的服务,使客户得到*大的增值,与客户建立长久、互赢、双赢的合作伙伴关系。
    ? ? 华盛将一如既往,以实事求是、踏实苦干为根本;以国际先进水平为目标,不断攀登技术高峰;以市场为导向,不断把高质量的产品奉献给广大客户。

    ?

    ?

    联?系?人:游国林 先生

    电????话:

    移动

    地????址:中国 东莞市黄江镇西路三街18号

    邮????编:523750

    我公司已在全国各省市有自己的办事处及售后服务点!您购买我公司产品,我公司给您品质保障!
  • 留言

    询价产品:
    *(必填)
    联系人: *(必填)
    手????机: *(必填)
    电????话:
    E-mail:
    公????司: *(必填)
    地????址:
东莞市黄江华盛仪器经营部?地址: 中国广东省东莞市黄江镇西进路三巷18号?技术支持:谷瀑环保?免责申明 管理员入口
内容声明:谷瀑环保为第三方平台及互联网信息服务提供者,谷瀑环保(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑环保提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑环保与店铺经营者沟通确认;谷瀑环保设备网上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑环保首页底栏投诉通道进行投诉。